Manual Datafox EVO 3.5 Universal
Seite 17
Datum: 26.11.2018 04.03.11.XX
6.3.2. Display setup and bios of the EVO-Line 3.5
6.3.2.1. Structure display "normal display" 3.5 Universal
The entire display surface is provided with a touch. Just tap with your finger on the tile you want to
select.
Date Time
corresponds to the system time of the device that is also used for the data records.
Number of records
in memory (displays up to 99, thereafter 99+).
Communication tile
with symbols for:
TCP /IP
During active communication this symbol will be displayed,
o
Wifi communication
Wifi is activated as the main communication
Wifi connected
Wifi communication active
o
USB
o
GPRS with state display e.g. [33] please refer „state messages on display“.
cellular modem switched off
cellular modem switched on but no connection to the provider.
cellular modem switched on, active connection to the provider.
Indicaton on display
o
In the main menu the header two of the setup is displayed.
o
In menus and input chains, the header lines 3 and 4 from the setup are displayed.
o
During the transmission of a setup or a firmware update, the device switch into a system stop
mode and displays this symbol „
system stop“ in this tile.
o
Display in the left area of the tile:
= transponder input (take over value of transponder)
= check in
= check out
tile for
„ESC“ if needed
Tile for state and company logo.
The logo can be uploaded via the Studio IV.
-> configuration -> display designer
date
time
tile
Texts according to setup (header two) name of EK and
name of input box.
Function buttons according setup
15 buttons are possible an to main
page
