Figure 4. Controller Slot Numbers
Slot A
Slot B
Introduction
96-00290-001 Rev. A1
DataDirect Networks StorageScaler 2460 User Guide | 4
Each controller has three
SAS ports
(Figure 4)
:
•
Use the input ports (HOST 1 and HOST 2) to connect to the host systems.
•
Use the expansion port (EXP) to connect to another StorageScaler 2460 enclosure. See
Section
1.8
for more information.
•
When using the StorageScaler 2460 in a zoned configuration, the three SAS ports are
assigned drives specifically to separate host computers. Please refer to
Appendix B
for
supported zoned configurations.
Each controller also has eleven status LEDs, as described in Section
3.2
,
Monitoring the
Controllers
.
To remove a controller from the enclosure, follow the instructions in Section
4.2
.
1.6
Disk Drives and Drive Carriers
Status LEDs
Lever Release Button
Figure 5. Disk Drive in Drive Carrier
The StorageScaler 2460 enclosure supports up to 24 SAS or SATA disk drives. For disk drive
requirements, see Section
1.2
. Disk drives are hot-swappable.
Each disk drive is mounted in a drive carrier
(Figure 5)
with a push-button lever for quick
installation and removal.
USO
RESTRITO
