51
© 2010 Datacom Systems Inc
FLOWcontrol™
VERSA
™
stream
7.2.2.3.1 MAC Address Wizard
The MAC Address Wizard enables the creation of a table of MAC Address
comparisons to be made against each incoming frame. Said entries can be made
using the procedures outlined below. The three buttons available within the MAC
Address Filtering Configuration are:
The
button is used to add table
entries from scratch.
The
button is used to
remove entire table rows. This button
is only enabled when an entire row
has been highlighted.
The
button is used to copy a
selected table and add the row to the
end of the currently entered table.
The row type only is copied. Specific
data is required to be entered for a complete specification of a given filter row.
The
button is used to cancel ALL entered filter specifications and return to
the Filter Management Screen. The
button always takes all currently
entered data and populates the information in the Filter Specifics Panel with the
selected data entered in the applicable area on the screen.
The MAC Address filter being created is either an Include or an Exclude filter as
determined by selecting the
or the
radio button. The two are
mutually exclusive. Selection of the Include Filter disables the Exclude Filter and
vice-versa. Individual MAC Address filter entries can now be made. When all
data entry is complete for the MAC Address Filter, click the
button.
To add entries to the MAC Address filter
table, select the
button, which
adds a row to the table with the values
specified as depicted.
A valid MAC Address entered in the
second column will enable the Rule
automatically.