manualshive.com logo in svg

Datacom FVS-1044, User Manual, Page: 47 / 90

Share
Download
Datacom FVS-1044 User Manual Download Page 47

47

© 2010 Datacom Systems Inc

FLOWcontrol™

VERSA

™

stream

7.2.2.2.11  Context Menus

Context menus are only available when dealing with the Rule Sets of a filter in
the Filter Specifics panel. 

The Add option is available on any of the Rule Sets or Rule # tree values.

The Delete option is available only on Rule # nodes greater than 1 for:

MAC Address Filter
VLAN ID Filter
IPv4 IP Address Filter
IPv4 PORT Number Filter
IPv6 IP Address Filter

Neither the Add or Delete Context Menu options are available in the Advanced
Filter type as the number of Rules in this filter type are fixed.

7.2.2.2.12  Value Specifications

Value Specifications within the Filter Specifics Panel of FLOW

control

™ are

changed in various fashions, depending on the items. 

The checkbox nodes of:

Include Filter
Exclude Filter
Include VLAN Tunneling Frames

are changed by double-clicking on the node in the tree. In the case of the
Include Filter or the Exclude Filter, double-clicking will check the selected node
and uncheck the other as the Include and Exclude Filters are mutually exclusive.
In the case of the Include VLAN Tunneling Frames node, double-clicking on the
node will toggle between the checked and unchecked state. 

The Rule Set and Rule # nodes are toggled from an expanded to a collapsed
state when a double-click of that node is performed. In addition, the same
functionality can be performed by clicking on the Å node. 

Double-clicking on a Range node will toggle from an expanded to a collapsed
state showing/hiding the range values for a selected range node.

Double-clicking on a value will present a dialog box requesting a value to be
specified. In the case of double-clicking on either the upper or lower value of a
range, the lower value dialog box will be displayed. Upon accepting or clicking
the 

 button, the upper range value dialog box will be presented. Upon

accepting or clicking the 

 button, the values in the Filter Specifics Panel

will be updated with the entered values. If the 

 button is depressed in

either of the upper or lower range, the values will be cleared. In addition if the
value is cleared in either of the dialog boxes, both the upper and lower values
will also be cleared.

Summary of Contents for FVS-1044



























































































Reviews:

No comments