© 2015 Datacom Systems Inc
9
VS-10XX-F, VS-11XX-F, VS-12XX-F FASTstart Guide
2.7 Rear
— Power Module
Each VERSAstream has two power modules on the back. These are for dual redundant power
supplies and should be connected to two separate circuits to ensure uninterrupted monitoring. Each
power module has an AC power socket, an AC power switch, and two LED indicators labeled “AC”
and “DC”. These LED indicators function in unison with the “POWER 1”, and “POWER 2”
indicators on the front of the device.
The LEDs located next to the “AC” and “DC” labels will illuminate
green
when a power supply is
connected and switched ON.
If either LED is illuminated
red
, it indicates a defective power source. Immediate investigation is
recommended to insure redundant power integrity.
2.8 Rear
— Management Module
The SERIAL 1 connector port is a shielded DB9
Female. This port can be connected to the COM
port of any compatible network tool or PC in
order to access the Command Line Interface for
device configuration.
The SERIAL 2 connector port is reserved for future use.
The MANAGEMENT connector port is a shielded RJ45 and is cabled to the network.
The Media Access Control (MAC) address identifier and certification compliance identifiers are
provided on this rear label.
