© 2015 Datacom Systems Inc
24
VS-10XX-F, VS-11XX-F, VS-12XX-F FASTstart Guide
5.4 Filtering
Use Case:
Traffic is coming in from TAP/SPAN ports exceeds the speed of the monitoring
devices that need to receive the traffic. Some of the monitoring devices only need to see part of the
data that is going over my TAP/ SPAN ports.
1.
To set up the above configuration on a VERSAstream, the first step is to install the correct SFP
types to connect to the devices on either end.
2.
The next step is to configure the ports on the device to match the speed of the devices connected
to them (For example, choosing between Auto-Negotiation copper or manually set speed).
Command
Description
set port speed 1,2,5 10G
Sets ports 1,2, and 5 to 10G Fiber speed.
set port speed 3,4 CU-AUTO
Sets port 3 and 4 to Auto copper speed.
show port config 1-5
Displays the configured speeds for ports 1-5.
1
2
3
4
5
