Datacolor 20D User's Guide008-400666 Rev A
3
USB Host Port Technology
The USB host port enables USB peripherals.
Allows easy export of data to a USB flash drive
Connection to USB HID keyboards or USB barcode scanners allows easy naming of samples
The keyboard layout currently supported is US101.
Not supported for terminal server environment
About This User’s Guide
This guide is provided in a PDF format for easy access. To return to the page previously viewed when using
the hyperlinks, press the following key combination:
<ALT> <left arrow key>
Electrical/Environmental Requirements
Input Power Requirements
5VDC, 2.0A
50/60 Hz
Battery
Lithium Ion Rechargeable Battery,
Maximum Charge Current: 4.0A
Absolute Operating Environment
Temperature:
5°C to 40°C
Maximum Relative Humidity: 20%-85% non-condensing
Altitude:
Up to 2,000 meters
Do not store above 140
F (60
C)
Indoor Use
Do not crush, short circuit, mutilate, reverse polarity,
disassemble, or dispose. In fire, might explode, cause burns, or
release toxic materials
Safety Warnings
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment might be impaired.
Battery:
Do not store above 140
F (60
C), crush, short circuit, mutilate, reverse polarity, disassemble, or
dispose
Light Source:
Do not stare directly into the open port located in the bottom of the instrument when the
measurement is in progress. Staring directly into the light source can result in the eye discomfort similar to
that of staring at a camera flash.
Battery Replacement:
Unit must be returned to factory or to an authorized Datacolor Service Center
Power Supply:
The power supply provided with the unit must be used.
In Fire:
Might explode, cause burns or release toxic materials
