background image

 

 92

Card Design Tasks

Print Mode Tab

The 

Print Mode

 tab allows you to specify the print resolution to use when printing a card. 

For card printers that support printing to rewritable cards, use the 

Print Mode

 tab to tell the 

printer to use the rewrite feature. Refer to 

“Select the Rewrite Option” 

on 

page 93

Select the Print Resolution

1. 

Open the 

Printing Preferences

 

window.

2. 

Select the 

Print Mode

 tab. 

3. 

Select the desired print resolution. The 

Print Mode

 tab has the following three 

options.



Always use standard resolution 
(300x300 dpi)

—This is the default 

selection.



Always use best possible 
resolution

 



Custom

—The Custom option 

allows you to select a resolution 
from the Color and Monochrome 
drop-down lists.

4. 

Click 

Apply

 to save your changes, and 

then click 

OK

 to close the 

Printing Preferences

 window.

The 

Print Mode

 tab does not display for the following printers:



CR805 retransfer card printer. The printer always prints with a resolution of 
600 x 600 dpi.



CE840 system, if the printer does not have a printhead installed.

Summary of Contents for SD460





























































































































































Reviews: