DataCard SD260 User Manual Download Page 32

Page: 32 / 156

XPS Card Printer Driver Installation

If the update fails to complete, the

Driver Update Failed

dialog box displays. Click

Remove

Driver

to remove the driver from your PC. You then can install the driver as a new install

(refer to

“Install the Driver”

page 9

Update a Shared Printer Client

If you use printer sharing, the host PC and all client PCs must be at the same version of the Card
Printer Driver to work properly.

You must update the Card Printer Driver on each client PC manually.

Update a Client PC Manually

To update the Card Printer Driver on a client system, do the following.

Make sure that the host computer has been updated. Refer to

“Update the Card Printer

Driver”

page 17

Open the

Devices and Printers

window on the client PC.

You may need to restart the client PC before proceeding with the following steps. If
the

Update driver

option displays when you select the printer, you do not need to

restart the PC.

Summary of Contents for SD260





























































































































































Search results

Summary of Contents for SD260

Reviews:

Related manuals for SD260

Brands by name

Popular brands

DataCard SD260, User Manual

Search results

Summary of Contents for SD260

Reviews:

Related manuals for SD260

Brands by name

Popular brands