manualshive.com logo in svg

DataCard SD260, User Manual, Page: 151 / 156

Share
Download
DataCard SD260 User Manual Download Page 151

XPS Card Printer Driver User’s Guide

 B-7

 

g. 

Click 

Install driver

. When a message displays that you successfully added the printer, click 

Next

.

h. 

Close any open windows.

i. 

Click 

Finish

 to close the wizard. The shared card printer icon displays in the 

Devices and 

Printers

 window of the client PC.

4. 

If card production software is installed on this computer, or if you need other support files, 
such as magnetic stripe fonts, install the XPS Card Printer Plug-in or support files from the 
Driver Installation CD. For instructions, refer to 

“Install Support Files” 

on 

page 22

.

5. 

Configure the client PC printing preferences. 

a. 

From the 

Devices and Printers

 window, right-click the card printer icon and select 

Printing preferences

. The Printing Preferences window displays.

b. 

Specify your printing preferences.

Refer to 

“Design Tasks in Windows Printing Preferences” 

on 

page 65

 for more 

information.

c. 

Click 

OK

 to close the 

Printing Preferences

 window.

Summary of Contents for SD260





























































































































































Reviews:

No comments