DataCard SD160, Installation And Administrator'S Manual

Page: 57 / 90

SD160/SD260 Card Printers Installation and Administrator’s Guide 43
FrontPanel
Use the FrontPanel settings to customize the printer front panel.
Change the front panel settings as needed, and then click Set Current to apply the changes.

BacklightBrightness —Set the LCD front panel backlight brightness at the desired level, from
0 percent (no backlight) to 100 percent (bright).

KeySenseLevel —Set the front panel key sensitivity to a comfortable level. Select from 0 (low
sensitivity, almost a press) to 10 (high sensitivity, barely a touch).

LcdConfigMenu —Enable or disable access to the Configuration menu on the LCD panel menu
system. (The Status and Maintenance menus cannot be disabled.)

LedCardsPickedToCleaning —Set the number of cards to pick between required cleaning. The
card light displays amber when the printer reaches this value. If this value is set to 0, cards
between cleaning are not tracked.

LedPrintheadCyclesToCleaning —Set the number of printhead cycles between required
cleaning. The card light displays amber when the printer reaches this value. If this value is set
to 0, cycles between cleaning are not tracked.

LedRibbonLow —Set the percentage of ribbon remaining before being notified that the
ribbon is low and should be changed. The ribbon light displays green when the ribbon
reaches this value.

SpeakerEnabled —Enable or disable the external printer speaker. The speaker provides a
sound in addition to the front panel lights and LCD text.
Description
Default
Value Current Value (unit) Allowed Range
1) BacklightBrightness 100 100 percent [0 – 100]
2) KeySenseLevel 4 6 None [0 – 10]
3) LcdConfigMenu Enabled Enabled
4) LedCardsPickedToCleaning 1500 1500 quantity [0 – 1000000]
5) LedPrintheadCyclesToCleaning 2500 2500 quantity [0 – 1000000]
6) LedRibbonLow 10 10 percent [0 – 100]
7) SpeakerEnabled Enabled Enabled