DataCard CE870, User Manual

Page: 35 / 92

CE870 Instant Issuance System User’s Guide 23
Press the U
SER
button to suspend the printer. Then, press E
NTER
to enter the menu system. Use
the arrow keys to move through the menus, and press E
NTER
to make a selection. The menu
system has four major branches:

Use the Maintenance menu to run a cleaning card, print a test card, or reset the locks on the
system.

Use the Status menu to see settings and data about the printer.

Use the Configuration menu to change printer settings.

Use the Activate menu to enable and disable secure features of the printer. This menu is used
only during installation or removal of a financial system that requires activation.
H
INTS
& T
IPS

You can access the menu system when the system is not actively processing cards and Ready
displays on line 1 of the LCD panel.

The printer returns to the Ready status after two minutes of no activity. Changes that have
not been applied are lost.

To leave a selection without changing the value, press the up or down arrow key until Exit
displays, and then press E
NTER
.
You can use the LCD menu to view or change several printer settings, including the following:

Pause the System on page 24

View the Printer Serial Number from the LCD Menu on page 25

Retrieve the Printer’s Network IP Address on page 26

View Card Counts from the LCD Menu on page 28

Change the LCD Backlight Brightness on page 30

Set Magnetic Stripe Coercivity from the LCD Menu on page 31