Data Video HS-1200 Instruction Manual Download Page 38

Page: 38 / 43

GPI Connection

The HS-1200 can control external recorder/playback devices via simple contact closure GPI switch.
The GPI interface is a 3.5mm Jack Socket which is situated on the rear panel of the HS-1200.

Contact closure between the Outer and Inner contacts on the jack plug will trigger a user selected event.

Power is supplied by the HS-1200 and is less than 5V DC.

This GPI socket can also be used as a socket to trigger record or playback events with other equipment

such as the Datavideo HDR-70 recorder.

SAFETY FIRST

The cabling required needs to be designed specifically to connect the HS-1200 to the chosen

record or playback device as they are not all the same. The cabling required can be made by yourself

or a competent technician. Please speak with your Dealer or local Datavideo office to get further help and

advice.

Summary of Contents for HS-1200












































Search results

Summary of Contents for HS-1200

Reviews:

Related manuals for HS-1200

Brands by name

Popular brands

Data Video HS-1200, Instruction Manual

Search results

Summary of Contents for HS-1200

Reviews:

Related manuals for HS-1200

Brands by name

Popular brands