31
5.7
Outputs
This option allows the user to configure various output settings such as video output, audio output, and
GPI Out.
Advanced Mode
Outputs
Output
Sdi 1
Pgm
Sdi 2
Input 2
HDMI
MultiV
HDMI
1080P
Audio
Mode
On
Level
Auto
Sdi 1
On
Sdi 2
On
HDMI
On
GPI Out
Off
Mode
Pulse
Width
1
Input 1
Delay
0
MultiViewer AutoNum
Off
Label Inf
Off
Trns Lab
Off
Basic Mode
Outputs
Output
Sdi 1
Pgm
Sdi 2
Input 2
HDMI
MultiV
HDMI
1080P
Audio
Mode
On
Level
Auto
Sdi 1
On
Sdi 2
On
HDMI
On
Outputs
In general, the two SDI output ports (
SDI 1 and
SDI 2
) located on the rear panel as well as the 17.3” built-in
monitor (
HDMI
) can be configured to output one of the following:
•
Input 6
•
Input 5
•
Input 4
•
Input 3
•
Input 2
•
Input 1
•
CLN PVW (Clean PVW)
•
CLN PGM (Clean PGM)
•
PG + DSK
•
PVW
•
PGM
•
MultiV (Multi view)
In addition to selecting your output source, you are also allowed to set two different resolutions for the
17.3” built-in monitor
. The two available resolutions are 1080i and 1080p.
Audio
The Audio sub-option for the SDI and HDMI outputs allows the user to individually turn ON/OFF the
embedded audio component for the
17.3” built-in monitor
(HDMI)
and at the
SDI1 and SDI2 output ports
(Sdi1 / Sdi 2)
.
Mode
(On/Off): The HS-1200 can only accept external audio using the analogue XLR inputs on the rear
panel. Ideally a master audio mixer would be used alongside the HS-1200. A Datavideo AM-100 or AD-200
could be considered. By changing the Audio sub option from ON to OFF will mute the incoming XLR audio
from the external master audio mixer.
