Data Flow Systems TCU800, Quick Start Manual

Page: 3 / 25

2
This document provides a brief overview of the TCU’s features and sufficient information to get the unit
mounted and powered in pump controller mode. Throughout this manual, the name “TCU” will refer to
specifically the TCU800 and NOT its predecessor the TCU001.
Detailed information on wiring the I/O, and configuring and using the TCU800 can be found in the TCU800
Installation and Operation Manual (see DFS website for the PDF version of this manual).
This quick start guide and other manuals can be found on Data Flow Systems’ web site at
www.dataflowsys.com .
This information is provided for qualified personnel only.
Improper installation, service, or maintenance can cause property damage, injury, or death.
Read the installation and operating instructions thoroughly before installing or servicing
this equipment.
Precautionary measures must be observed when installing, operating, and servicing the
TCU in order to prevent shock from voltages present.
If the TCU is to be installed into an existing control panel, make sure that all breakers are
shut off before starting the installation.
All wiring must conform to federal, state, and local electrical codes.