3
Attention
Keep away from inflammables.
If installed on or near combustible material, it could cause fire. When there is fire or smell, stop operation
immediately and contact us right away.
Shut off input power (solar cell) and output power (AC power) immediately when the inverter
malfunctions.
Otherwise, it could lead to fire by subsequent accidents.
Do not touch the inverter for about 10 minutes even if the power is off or when the power is on.
The inverter is very hot and it could cause burn on your body.
Do not input power even if you finish installation when the inverter or a part is damaged.
It could cause electric shock.
Be careful not to get any screw, metals, water, oil, etc. inside inverter.
It could cause fire.
Directions for Application
(1)
Transportation
Please transport by proper means according to product weight.
Please check external conditions.
Do not pile up beyond the limited level or height.
Do not open the cover while transported.
Do not drop or damage with shock, as this device is a precision one.
(2)
Applications
If auto-operation function is initially set up, it automatically operates when the voltage goes above the start-
up voltage.
You can operate or stop with run/stop key on key pad.
Reset troubled items, and then it automatically operates after waiting time.
Do not remodel at your convenience.
Reset to the required value when initialized, otherwise it automatically reset to the predefined value.
(3)
Trouble-shooting
In the event that the inverter gets damaged so that it becomes uncontrollable, the device can be placed in a
dangerous state. In order to prevent such state, install additional safety device such as emergency brake.
(4)
Maintenance and Repair
Don’t perform mega-test (for electric insulation and resistance) for inverter control circuit. It could cause
malfunctions or damages.
Refer chapter 6 for detailed Descriptions.
