9
3. Installation
3.1 Configuration
1) DSP-123K5-OD
3.2 Installation place
Install the Solar Inverter at the place satisfying following conditions.
1) Do not install the inverter at the place where the vibration exists.
2) As the lifetime of inverter is affected by surrounding temperature, make sure that the surrounding temperature
around the place where the inverter is installed is lower than the allowable temperature (-10 ~ 50
℃
).
3) Avoid hot and humid place (Relative humidity should be less than 90%. No dewfall).
4) Install the inverter at the place with no direct sun shine.
5) As the inverter is a high temperature unit which generates the heat, it should be installed at the face of non-
flammable material.
6) Secure the sufficient space around the inverter so as to install it for efficient dissipation of the heat.
7) Avoid the place where oil mist, flammable gas, fabric mote, dust and moisture do not exist.
8) Install the inverter by tightening the screws firmly.
9) Install the inverter at the place where no salt exists.
