Dascom T2150, User Manual

Page: 157 / 166

User guide Options and accessories
149
Options and accessories
Options
The following options can be ordered for your printer.
Automatic cut sheet feeder,
front (ASF-F)
The automatic sheet feeder is suitable for single sheets. Paper for-
mats with a width of 150 to 365 mm may be used. Each format in
between can be set. The cut sheet feeder cannot be used in con-
junction with the optional tractor front.
Part no.: 061797 (narrow printer)
Part no.: 061798 (wide printer)
Automatic cut sheet feeder,
rear (ASF-R)
The automatic sheet feeder with two bins is suitable for single
sheets and sets of forms with 1 + 2 forms. Paper formats with a width
of 100 to 223 mm (narrow printer) or 365 mm (wide printer) may be
used. Each format in between can be set.
Part no.: 061799 (narrow printer)
Part no.: 061800 (wide printer)
Tractor 2, front
The push tractor is suitable for fanfold paper and sets of forms with
1 + 5 forms. Paper formats with a width of 76 to 264 mm (narrow
printer) or 406 mm (wide printer) may be used. Each format in bet-
ween can be set.
Part no.: 061795 (narrow printer)
Part no.: 061796 (wide printer)
Tractor 3, rear
The push tractor is suitable for fanfold paper and sets of forms with
1 + 1 forms. Paper formats with a width of 76 to 264 mm (narrow
printer) or 406 mm (wide printer) may be used. Each format in bet-
ween can be set.
Part no.:061795 (narrow printer)
Part no.:061796 (wide printer)
Serial interface adapter
Serial interface adapter from 9 to 25 pins
Part no.: 047995
Optional paper support
Part no.: 052127
Pocket Ethernet interface
Part no.: 048791
Serial interface RS232/TTY
Part no.: 048793
Others
On request
E