2
•
Replace damaged or worn cord immediately.
Call Darex® Technical Support for assistance.
•
Grounded, cord-connected tools intended for use on a supply circuit having a nominal
rating less than 150 volts:
This sharpener is intended for use on a circuit that has an outlet
that looks like the one illustrated in Figure B, below. The tool has a grounding plug that
looks like the plug illustrated in
Figure A
. A temporary adapter which looks like the adapter
illustrated in
Figures C
and
D
, may be used (except in Canada) to connect this plug to a
2-pole receptacle as shown in
Figure B
if a properly grounded outlet is not available. The
temporary adapter should be used only until a qualified electrician can install a properly
grounded outlet. The green colored rigid ear lug,
Figure D
, extending from the adapter must
be connected to a permanent ground such as a properly grounded outlet.
Personal Safety:
•
WARNING!
Sharpening operations can create hot sparks and metal debris, loud
noises and dust!
•
Stay alert - watch what you are doing and use common sense when operating a power tool.
•
Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
A moment of inattention while operating power tools may result in serious
personal injury.
•
Use Personal Protective Equipment (PPE). Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions will reduce personal
injuries.
•
Prevent unintentional starting.
Ensure the switch is in the off-position before connecting to
a power source.
•
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a
key left attached to a rotating part of the sharpener may result in personal injury.
•
Do not overreach. Keep proper footing and balance at all times.
This enables better
control when using the sharpener. Nonslip footwear is recommended.
•
Dress properly. Wear closed, non-flammable protective clothing.
Do not wear loose
clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
•
Secure work. Use clamps or a vise to hold work when practical.
It’s safer than using your
hand and it frees both hands to operate tool.
•
Never leave tool running unattended.
Turn power off.
•
Do not touch internal parts of the sharpener when it is on.
The rotating wheel can cause injury.
Sharpening Tool Use And Care:
•
WARNING!
Use recommended accessories.
Use the power tool, accessories, abrasives,
and bits etc., in accordance with these instructions, taking into account the working conditions
and the work to be performed. Use of the sharpener for operations different from those intended
could result in a hazardous situation.
Fig. B
Fig. C
Fig. D
Fig. A
Grounding Pin
Fig. A
Fig. B
Fig. C
Fig. D
Grounding
Means
Cover of
Grounded
Outlet Box
Metal
Screw
Summary of Contents for XPS-16+
Page 1: ...Operating Instructions XPS 16 CNC Drill Grinder and Sharpener ...
Page 2: ......
Page 40: ...37 Notes ...
Page 41: ...38 ...
