Darex XPS-16+, Operating Instructions Manual

Page: 14 / 42

11
Point Angle Adjustment
Press the [Point Angle] icon. A keyboard will appear. Type in the point angle of the drill
you wish to grind. The acceptable range is 90°-150° for conic ground drills and 115°-
150° for facet ground drills.
118°
Use the [LEFT
ARROW] button to
backspace.
Press the [CHECK] button to
save the point angle to the
main operating screen.
Pressing the
[X]
button
cancels the change and
takes you back to main
operating screen.
Touch Screen Details
Main Operating Screen
The screen shot this shows what will be
depicted on the touch screen once power
has been applied to the XPS-16+. Press the
[check] in order to initialize the XPS-16+.
This is the Main Operating Screen.
Starting left to right and top to bottom,
each icon will be explained in detail.
The Environmental Door has to be closed
for the machine to execute initialization.