Copyright © 2008 – 2019 DARE!! Products
Page 30
5.7
Response Times for Data Readout (Mode 2 - Envelope Tracing) Power Sensor
In mode 2, several commands can be used to read the data from the buffers of the Radi
P
ower
®
.
The following table shows the approximate time for the data transfer at 115200 bps.
Command
Description
Time
“ACQ_LOG_DATA?”
Read power values from
buffer samples 0 to 1000 in ASCII
text.
720ms
“ACQ_LOG_DATA_ENH? <i>,<j>”
Read power values from buffer
<i> samples before trigger to <j>
samples after trigger in ASCII text.
720ms for i=j=500
1425ms for i=j=1000
2850ms for i=j=2000
“ACQ_LOG_DATA_ENH_BIN?
<i>,<j>”
Read power values from buffer
<i> samples before trigger to <j>
samples after trigger in binary
format.
180ms for i=j=500
360ms for i=j=1000
720ms for i=j=2000
5.8
Error Codes Power Sensor
Error code
Description
“ERROR 1”
Wrong command
“ERROR_50”
Wrong argument
“ERROR_51”
Argument too low
“ERROR_52”
Argument too high
“ERROR_601”
Frequency not set
“ERROR_602”
Over range
“ERROR_603”
Under range
“ERROR_604”
No Cal data
