DARAY X340, Operating & Installation Manual

Page: 14 / 48

Page 13 of 43
3.3 Adjusting the Light Head
The X340 head is secured using a pivot adjustment knob on the right hand side of the
arm, near the head. This also controls the forward and backward motion of the head
itself.
DO NOT confuse this with the tension adjustment knob on the left side – see
section 5.6 (Page 35).
Loosening this thumb screw will allow you to pivot the light-head up or down.
The head has a total turning capability of 320 degrees, attempting to push further
may cause damage to the movement and internal wiring of the light.
NOTE: Care should be taken not to over tighten the screw.
Head pivot
adjustment knob