DAPAudio D2250, Manual

Page: 3 / 43

Features
1. 32/40 CHANNELS MONO INPUTS
8 Mixing Console provideds 32,40 channels of mono input that can be mixed down to a Stereo Mix, 8 Groups,
8 Aux sends
.
2. 4 CHANNELS STEREO INPUTS
These mixing consoles provides 4 channels of stereo channel input that can be mixed down to a Stereo Mix , 8
Gropus, 8 Aux sends.
3. 8 AUX SENDS, 6 STEREO AUX RETURNS
8 AUX SENDS systems and 6 STEREO AUX RETURN systems are provided.Even when two 1- in/2-out effect
devices are connected, two more AUX SEND systems are still available for use.
4. 4 BAND EQ WITH SWEEPABLE HIGH-MID,LOW-MID RANGE BAND
All mono input channels include 4 band equalizer with sweepable high-mid and low-mid range frequency.
5. XLR CONNECTOR AND 1/4
″
TRS CONNECTOR
XLR type connectors are provided for MIC jacks and 1/4 ″ TRS connectors are provided for the LINE and
TAPE IN jacks.
6. 8 GROUP MIXING BUSES
8 Group mixing buses, each with its own Master Fader,ON/OFF Switch to Stereo Mix Buses.
7. TAPE INPUT
You can connect the outputs of your multi-track recorder.
8. INPUT CH INSERT I/O JACK and DIRECT OUT JACK
INPUT CH INSTER I/O jack and DIRECT OUT jack are provided on each channel , allowing you to connect
effect devices independently for each channel.
9. MASTER INSTER I/O
INSTER I/O connector are provided on GROUP OUTPUT 1~8,STEREO MIX OUT and MONO OUTPUT,
allowing you to connect sub mixer or other sound device independently for each output.
10. SOLO SWITCH
It is handy for spot-checking the presence and quality of individual inputs while setting up,recording and mixing.
SOLO does not interrupt the eight main Master ,the L/R Mix OUT or AUX sends,and can be used at any time
without affecting the recording process.
11. 10 DOT LED DISPLAY
10-DOT LED Meter illuminated for precise visidual level monitoring.
2 point input level indicators on all input channel.
Especially status of Main Mix L/R Master be showed by analog VU Meter.
8 BUS MIXING CONSOLE
2