DAPAudio D2250, Manual

Page: 21 / 43

1 1 2 1 3 4 5 6 7
9. MASTER LED SECTION
1. GROUP OUTPUT LEVEL INDICATOR (8 GROUPS)
A vertical row of ten light-emitting diodes shows the continuous output level of Group output.
For optimum signal-to-noise (s/n) ratio, try to adjust all levels so that program material is usually at or around 0 VU,
with occasional but mot steady excursions to the +3,or over the level scale.
2. MONITIOR OUTPUT INDICATOR
A vertical row of ten light-emitting diodes shows the continuous output level of MONITIOR or MONO. Each
indicator is calibrated in volume units , such that 0dB corresponds to an output of 1.23 volts , which is +4dBu a
standard in the industry.
3. METER SELECT SWITCH
This switch selects whether MONITIOR or MONO will be monitored.
- MONITOR ( ,RELEASED SWITCH) mode, the LED meter displays the output levels of the CONTROL
ROOM output jacks.
- MONO ( ,DEPRESSED SWITCH) mode ,the LED meter displays the output level of the MONO output jacks.
4. STAND-BY INDICATOR
This indicator lights when the power switch is turned on.
5. SOLO INDICATOR
This indicator lights when the SOLO switch is turned on.
8 BUS MIXING CONSOLE
20