10
AS-8
Ordercode: D1904
Splitter
Fig. 06
01)
The output signal from the mixer is applied to the main inputs of the AS-8.
02)
If the SPLITTER/MIXER buttons are depressed (set to Splitter), then the mono outputs of the respective
channels provide the left or right main signal.
03)
Turn the Balance control to set balance between the left and right signal.
04)
The main input signal is also sent to the left or right output. These outputs are not equipped with a
balance routing function.
05)
The left main input is routed to the left main output and the right main input – to the right main
output.
4-channel Stereo Splitter
01)
The stereo signal source should be connected to the 2 main inputs.
02)
If all mono channels are set to Splitter mode, the Balance controls of CH1, 3 and 5 are turned to the
left and the Balance controls of CH2, 4 and 6 are turned to the right, then the corresponding stereo
output pairs will be routed via channels 1+2, 3+4, 5+6.
Summary of Contents for AS-8
Page 15: ...14 AS 8 Ordercode D1904...
Page 16: ...2016 DAP Audio...
