9
AS-8
Ordercode: D1904
Mixer
Fig. 05
01)
If the mono channels are used in Mixer mode, a maximum of 8 mono input signals can be routed to
the main outputs.
02)
The individual signal sources are connected to the mono inputs.
03)
Each channel is equipped with a Level control, which can be used for setting the amount of its
signal, relative to others in main section. By turning the Pan control, each mono input signal can be
routed to the left/right main output.
04)
Turn the Main Output Level control to set the level of the main output signal.
05)
Due to the fact that both main inputs can be routed alternatively, it is possible to add 2 extra input
signals. To do so, depress the
Main Link button (02)
.
06)
Due to the fact that these inputs are not equipped with a Pan control, the left main input will always
be routed to the left main output. Similarly, the right main input can only be sent to the right main
output. The 8 available mono channels can be routed to 2 main outputs.
Summary of Contents for AS-8
Page 15: ...14 AS 8 Ordercode D1904...
Page 16: ...2016 DAP Audio...
