Dantherm AC-24, Service Manual

Page: 29 / 52

Introduction
The procedures below describe how to reset the thermo and replace the control circuit fuse.
Thermo relay
If the running current for the compressor, condenser fan or evaporator fan exceeds the set value,
the thermo relay will switch off the compressor or fan and will have to be reset.
Reset Thermo relay
Push the buttons one by one in no particular order to reset the thermo relay.
See buttons marked with arrows below.
Control circuit fuse
If the running current for the control circuit is too high, the fuse will blow, and will have to be
replaced. See location below.
Reset of thermo relay and control circuit fuse
29
en