manualshive.com logo in svg

Dantel 46502, Installation & Operation Manual

Share
Download
Dantel 46502 Installation & Operation Manual Download Page 39

46502-0999 <90-00021>

 P

AGE

 39

A

LT

 F

XX

The A)lt Fxx option allows you to define text strings that you
can play back when you press the Alt key and one of the function
keys simultaneously.

To program the Alt and function keys:

1.

Type A. This screen appears:

2.

Enter a string of characters, up to a maximum of 56 characters. An
Enter can be included as part of the string by entering Ctrl-M.

3.

Press Enter.

If you do not want to program a particular function key, press En-
ter to advance to the next field.

If you do not want to program all the function keys, press F10 to
return to the Edit Configuration window.

At the last field (Alt F10), the Edit Configuration window appears
when you press Enter.

The programming of the function keys remains in effect until
you change the programming or you exit to the Master Menu.
When you return to the Master Menu, the programming of the
function keys is erased.

See Finish on the next page if you wish to save the program-
ming.

TERMINAL EMULATOR

Summary of Contents for 46502













































Reviews:

No comments

Brands by name

Popular brands

Load more brands