manualshive.com logo in svg

Dantel 46502, Installation & Operation Manual

Share
Download
Dantel 46502 Installation & Operation Manual Download Page 22

P

AGE

 22

46502-0999 <90-00021>

5.

Type in your local GPP password (not the Status Monitor GPP
Editor password) and press Enter. If there is no password, just
press Enter.

NOTE:

Press Esc to abort an upload in progress.

R

EPORTS

The Reports option lets you generate reports on the GPP data-
base. Most of the reports can be sent to either the screen, a file
or a printer.

Here is the GPP Editor screen with the GPP Reports menu:

To select an option:

1.

Highlight an option. A brief description of each option appears be-
low.

2.

Press Enter.

3.

Go to the subsection that explains the option you selected.

Polling List Without Points - Contains an output of all
defined polling list entries.

Polling List With Points - Contains an output of all defined
polling list entries and their points.

Graph of MAP/Display Usage - Displays a graph of the
defined polling list on the screen.

GPP SYSTEM DEFINITION

Summary of Contents for 46502













































Reviews:

No comments

Brands by name

Popular brands

Load more brands