manualshive.com logo in svg

Dantel 46502, Installation & Operation Manual

Share
Download
Dantel 46502 Installation & Operation Manual Download Page 23

46502-0999 <90-00021>

 P

AGE

 23

P

OLLING

 L

IST

 W

ITHOUT

 P

OINTS

To generate a report:

1.

In the Output to field, type F for file, P for printer, or S for screen.

2.

Press Enter.

CAUTION:

When a printer is the destination, an error message will appear
if there is no printer connected to your computer or if the
printer is not turned on. If the error message appears, you must
press any key to continue. The computer exits the program and
returns to the Master Menu.

When a file is selected as the destination of a report, you are
prompted for a DOS file name. If no file name extension is
entered, the extension .LST is automatically appended. The file
will be sent to the destination specified in the Rpt Path of the
Parameters option. Refer to the Parameters chapter.

Here is an example of the report on the screen:

P

OLLING

 L

IST

 W

ITH

 P

OINTS

To generate a report:

1.

In the Output to field, type F for file, P for printer, or S for screen.

2.

Press Enter.

GPP SYSTEM DEFINITION

Summary of Contents for 46502













































Reviews:

No comments

Brands by name

Popular brands

Load more brands