manualshive.com logo in svg

Dantel 46502, Installation & Operation Manual

Share
Download
Dantel 46502 Installation & Operation Manual Download Page 20

P

AGE

 20

46502-0999 <90-00021>

Alt-F9 - Show - Displays a list of all entries you made in the
selected field.

F10/Esc - Exit - Returns to the GPP Polling Display screen.

NOTE:

When you press F10/Esc, the alarm point configuration is not
saved. Press F8 to save the information.

T

RANSFER

The Transfer option lets you do the following:

♦

Download the configuration to a GPP database.

♦

Upload a configuration from a GPP database.

♦

Download a GPP configuration to 46062 GPP memory.

♦

Request a GPP database to identify itself.

Here is the GPP Editor screen with the Transfer window:

Before beginning the transfer process:

1.

Press Alt-F9 to check the communications parameters. Refer to the
chapter on Parameters for descriptions of the parameters.

2.

Check the GPP Configuration address. The address is shown in the
GPP Editor screen. Press F10 to exit the Transfer window and
display the full GPP Editor screen. The address must be the same
as the default address of the GPP.

GPP SYSTEM DEFINITION

Summary of Contents for 46502













































Reviews:

No comments

Brands by name

Popular brands

Load more brands