DB-70 Automatic Wheel Balancer
51
P/N 5900261 — Rev. A1 — January 2021
Error Codes
Error Code
Cause
Solution
Err-01
Optical diaphragm error,
Power board error, motor
error.
1.
If error 1 occurs and the
Shaft can rotate, replace
the optical diaphragm.
2.
If error 1 occurs and the
shaft cannot rotate, it
may be due to power
board error or motor
error.
Err-02
No Tire or belt is too tight.
Install wheels or adjust belts.
Err-03
Excessive unbalanced Tire
quality.
Check whether the wheel is
aligned and whether there are
foreign bodies on the wheels.
Err-04
Wheel runs in reverse.
Check motor wiring.
Err-05
Tire cover has not been
lowered.
If the cover is in the lowered
position, adjust or replace the
microswitch.
Err-06
User has pressed the Stop
key.
Press the stop key again to
clear the error, and retest.
Err-10
No 100g weight was added
in step 2 of self-calibration.
Run the calibration sequence
again installing the weights
correctly.
Err-11
No 100g weight or sensor
wiring error in the third step
of self-calibration.
Run the calibration sequence
again installing the weights
correctly.
Err-15
Parameter storage error.
Replace the power board.
Err-20
Integrated circuit damage.
Replace CPU board.
If you continue to have problems with your Wheel Balancer, visit
Dannmar at
(877) 432-6627
Summary of Contents for DB-70
