DB-70 Automatic Wheel Balancer
47
P/N 5900261 — Rev. A1 — January 2021
7.
When the Wheel stops, turn the Wheel until the Inner Placement Indicators are all lit and the Wheel
locks in position.
8.
Put a Mark at Top Dead Center on the Wheel Rim.
9.
Press
Stop
to release the Wheel, then turn the Wheel until the Outer Placement Indicators are all lit
and hold the Wheel in position with the brake.
10.
Put a Mark at Top Dead Center on the part of the Tire next to the Wheel Rim.
11.
Remove the Wheel from the Balancer, then use a Tire Changer to take the Tire off the Wheel, rotate
the Tire so the two Marks you just put on are aligned, then put the Tire back on the Wheel.
12.
Put the Wheel back on the Balancer and restart the Balancing process that was interrupted by using
the Optimize Function.
Calibration
Calibrate the Balancer using the included 100g weight on a regular basis. When placing weights on
wheels, apply the weight exactly perpendicular to the shaft at the 12 o’clock position. Incorrect placement
will result in additional weight call outs and/or an improperly calibrated machine.
1.
Install a Wheel and input Wheel Data (Inside Measurement, Diameter and Width) into the Balancer
memory.
2.
Press the
C
button to enter the calibration mode. The Inner and Outer Display Windows should display
the CAL.
3.
Press the Start Button twice. The wheel will rotate. When
the motor shuts off use the brake to stop the Wheel
motion.
4.
Manually spin the Wheel until all the indicator lights on
the Outer Position are lit.
5.
Place a 100g weight on the outside of the Wheel at the 12 o’clock position.
6.
Start the Balancing Machine by pressing the Start key. The Wheel will rotate, when the motor shuts
off, use the brake to stop the Wheel.
7.
Manually spin the Wheel until all the indicator lights on the inner position are lit.
8.
Place a 100g weight on the inside of the Wheel at the 12 o’clock position.
9.
Start the balancing machine by pressing the Start key. When the motor shuts off, use the brake to
bring the wheel to a stop.
10.
The calibration is complete and the unbalanced amount of the Wheel at the last rotation is displayed.
Summary of Contents for DB-70
