Pag
e
22
14.3 Entering wheel dimensions
The dimensions of the wheel to balance can be entered in automatic way (partially or completely).
14.3.1 Automatic acquisition of the wheel dimensions for the STD and ALU1, 2, 3, 4, 5 Program Types
To automatically introduce the wheel size data, proceed as follows:
Op.
Description
10
Fit the wheel on the shaft and tighten with the ring nut.
20
Press [2] or [4] from the keyboard
and select the
icon relative to the programme to be used.
30
Activate the STANDARD programme by selecting
(by default at start-
up) which will be outlined in green.
Scroll through the list of available programmes by pressing [1] or [3] on the
keyboard.
-
-
-
-
-
-
40
Select the icon relative to the required programme.
50
Only for programmes STD, ALU1, ALU2, ALU3, ALU 4, ALU5; take out both
sensors and place them on the rim, as shown here.
60
Wait to hear the long acquisition beep and then set the sensors back to the rest
position. During acquisition the distance and diameter values are displayed on
the wheel dimension data band.
