Pag
e
20
40
To acquire automatically the geometrical wheel data by Distance/Diameter and
Width sensors, it is necessary to keep the same reference points on the rim as
Program Type ALU1.
Furthermore, when the Wheel Type MOTO is selected, the actual distance value
is increased of 150 mm due to the extension length for the Diameter/Distance
sensor.
When the Wheel Type MOTO is activated, automatically, the ALU1 Program Type is selected, if you attempt to select another
programs by keys [2] o [4] the machine will display the error code
ERR 043
.
To acquire automatically the geometrical wheel data by Distance/Diameter and Width sensors, it is necessary to keep the same
reference points on the rim as Program Type ALU1.
Furthermore, when the Wheel Type MOTO is selected, the actual distance value is increased of 150 mm due to the extension
length for the Diameter/Distance sensor.
Each time the motorcycle adaptor is removed (for example for balancing a car wheel) and installed again, it is always necessary to
match the written “Cal” which are present on the flange and on the motorcycle adaptor otherwise the balancing accuracy may be
compromised.
Extension for
sensor
