Pag
e
8
9. ROUTINE MAINTENANCE OF THE WHEEL BALANCER
Warning
The manufacturer declines all responsibility in the event of claims resulting from the use of non-original spare parts or accessories.
Warning
Unplug the machine from the socket and make sure that all moving parts have been locked before performing any adjustment or
maintenance operation.
Warning
Do not remove or modify any part of the machine (except for service interventions).
Caution
Keep the work area clean.
Never use compressed air and/or jets of water to remove dirt or residues from the machine. Take all possible measures to prevent
dust from building up or rising during cleaning operations. Keep the wheel balancer shaft, the securing ring nut, the centering cones
and flange clean. These components can be cleaned using a brush previously dripped in environmentally friendly solvents. Handle
cones and flanges carefully so as to avoid accidental dropping and subsequent damage that would affect centring accuracy. After
use, store cones and flanges in a place where they are suitably protected from dust and dirt. If necessary, use ethyl alcohol to clean
the display panel. Perform the calibration procedure at least once every six months.
