8
When removing the lift from shipping angles pay close attention as the posts can slide and can cause injury. Prior to
removing the bolts make sure the posts are held securely by a fork lift or some other heavy lifting devise.
PARTS INVENTORY
Be sure to take a complete inventory of parts prior to beginning installation.
Shipment Parts
2 Column
Assemblies
4
Lift Arm Assemblies
1
Power Unit - 110-208V, 50/60HZ, 1-Ph.
1
Power Unit Cart
Parts Bag
10
5/8” x 2” Hex Bolt For Anchors
10
5/8” Flat Washers
10
5/8” x 11 Power Drop Recess Anchors
4
Male Quick-Disconnect Fitting
4
Female Quick-Disconnect Fitting
2
Hose Assemblies With 3/8” NPT Male-Thread Fittings
2
Pipe Reducer (3/8” NPT FEMALE - 1/4” NPT MALE)
4
3/8” x 3/8” Pipe Nipple
2
45-Degree Pipe Fitting (3/8” NPT FEMALE - 3/8” NPT MALE)
1
Long 3/8” NPT - 3/8” JIC 90-Degree Fitting
1
Long 90-Degree 3/8” x 3/8” O-Ring Fitting
8
5/16”-18 x 3/4” Hex Bolts (For Power Unit and Flow Divider)
8
5/16”-18 Hex Nuts (For Power Unit and Flow Divider)
8
5/16” Lock Washers (For Power Unit and Flow Divider)
8
5/16” Flat Washers (For Power Unit and Flow Divider)
4
5/16”-18 x 3” Hex Bolts (For Column Wheels)
4
5/16”-18 Nylon Hex Nuts (For Column Wheels)
12
C-Washers / Floor Mounting Shims
4
“C” Retainer Clips for Arms
4
Chrome Pull Rings for Arm Pins
4
3/8”-16 x 1” Hex Bolts (For Column Top Straps)
4
3/8”-16 Hex Nuts (For Column Top Straps)
4
3/8” Flat Washers (For Column Top Straps)
1
Rubber Power Unit Dampner Pad
2
4” Wheels For Power Unit Cart
2
Retainers for Power Unit Cart Wheels
4
3” Wheels For Columns
1 Roll
-
Tefl on Tape
Parts Box
2 Column
Top
Straps
1 Flow
Divider
4
Contact Lift Pads
4 Stackable
Pad
Adapters
4 Arm
Pins
2 Lock
Bars
Optional Motorcycle Adapter Kit
1 Adapter
Frame
Assembly
1
3/8” x 3/8” Pipe Nipple
1
Male Quick-Disconnect Fitting
