14
STEP 7
( Connecting Hydraulic Lines )
1. Thread the Male Quick Disconnect Fittings onto the rear
cylinder fittings using Teflon tap on the pipe threads. (See
Fig. 7.1)
2. Install the Female Quick-Disconnect Fittings at each
hose end. (See Fig. 7.2)
3. Recheck all fitting connections to make sure they are
properly tightened before proceeding.
4. Position the Power Unit Stand at the front or rear of the
vehicle.
5. Connect one end of each Cylinder Hose Assembly to
the Quick Disconnect fitting at the base of each Cylinder.
(See Fig. 7.3)
4.Connect the other end of the Hoses to the Upper Quick
Disconnect fittings on the Flow Divider.
(See Fig. 7.4)
STEP 8
( Installing the Lift Arms )
1. Place the Lift Arm Assembly on the Lift Heads. Install
the Lift Head Pins into the Lift Head and through the holes
in the Arm Assembly. (See Fig. 8.1 / 8.2 )
Fig. 7.3
Fig. 8.1
Fig. 7.1
Fig. 7.2
Fig. 7.4
Fig. 8.2
