10
STEP 4
( Installing the Hydraulic Cylinders )
1. Install the Cylinder Fittings as shown using Teflon tap on
the pipe threads. (See Fig. 4.1)
2. After installing the Column Wheels, turn the columns
over and lay down open side up. Slide the Carriages
upwards until centered midway in the columns. (See Fig
4.2)
3. Install the cylinders through the Carriage Bottom Plate
then through the Carriage Top Plate until the Cylinder
Rings come in contact with the Carriage Bottom Plate.
(See Fig 4.3)
4. Position the Cylinder Fittings through the access hole
located on the backside of the column. (See Fig 4.4)
5. Install the Column Tie Bars using the 3/8”-16 x 1” Hex
Bolts, Nuts and Washers. (See Fig 4.5)
Fig 4.1
Fig 4.2
Fig 4.3
Fig 4.4
Fig 4.5