background image

 

Message Receiving Phone 

Number 

  [Program password] + [57] + 

[phone number] + [#] 

[57]~[59] 3 groups 

Delete Message 

  [Program password] + [57] + [#] 

[57]~[59] 3 groups 

Defence zone Programming 

  [Program password] + 

[60]+[01~08]+[1~4]+[1~8]+[0/1]+[#] 

Factory default: 1/1/0 

Stay in defence zone 

  [Program password] +   

[61] + [01~08] + [0/1] + [#] 

Factory default: 0 

Remote Arm 

[Operation password] + [1] + [#] 

 

Remote Disarm 

[Operation password] + [2] + [#] 

 

Appliance Open 

[Operation password] +5# or 

[Operation password] +7# 

 

Appliance Close 

[Operation password] +6# or 

[Operation password] +8# 

 

 

 

Change Password

 

 

   

  In the status of remote control programming, directly enter the address code [30]/[31] by phone keys, enter the 

4-digit new password, at last add [#] to confirm. The main unit 

emits a long “beep” tone, indicating the operations 

are successful. 

Operation password: 

 

Programming password: 
Illustration:  “X”  indicates  the  new  password;  for  example,  change  the  factory  default  (8888)  of  programming 

password into the new password: 0000. 

             

 

SMS Command: 8888310000#

 

Operation  Password:  after  dialing  the  SIM  card  number  by  mobile  phone  (or  fixed  phone),  if  you  enter  the 

operation  password  (factory  default:  1234),  you  can  only  perform  the  operations  including  arm,  disarm  and 

monitoring by remote control. 

 

Programming  Password:  after  dialing  the  SIM  card  number  by  mobile  phone  (or  fixed  phone),  if  you  enter 

programming  password  (factory  default:  8888),  you  can  only  perform  the  following  settings  including  voice  call, 

SMS receiving phone number and functions. 

       

      Cautions: the operation password and the programming password can not be set to the same number. 

 

 

Phone Setting

 

 

 

Voice Call 

 

      When it is set to alert through voice call, the main unit can send warning voice message to 6 phone numbers, 

(for example: defence zone 

5, balcony alarm, this is……) . 

       

      In the status of remote control programming, enter the address code [51]~[56], enter the phone (fixed phone) 

number  and  then  enter  [#]  to  confirm.  [51]~[56]  represent  the  address  codes  corresponding  to  voice 

#

3 1

0 0 0 0

#

3 0

X X X X

#

3 1

X X X X

Summary of Contents for YA-300-GSM
















Reviews: