It means to clear the memory of alarm. After the main unit sounds alarm, all the indicators of the triggered
defence zone will be on and locked. In the status of disarm, only repeating the operations to disarm the guard can
eliminate the lock display of the alarmed defence zone; after the alarm is canceled, all the indicators of [Arm ] will
go out.
Remote control operations: press [
] on the remote control.
Emergency Alarm
Remote control operations: press [
] on the remote control.
Receiving Alarm by Phone
After the main unit sounds alarm, it will automatically dial the preset numbers (mobile phone number) in order.
After the user answers: he or she will hear the alarm recording. Meanwhile, users can also do remote control on
the alarming main unit by pressing the phone (mobile phone) keys:
[1] Key: main unit stops the alarm and arranges guard; it does not dial the number any more.
[2] Key: main unit stops the alarm and disarms guard; it does n0t dial the number any more.
[3] key: main unit stops the alarm, monitors the scene for 30 seconds and does not dial the number any more;
for continuing, press [3] again to monitor for another 30 seconds.
[4] key: main unit stops the alarm, intercom the scene for 30 seconds and does not dial the number any more;
for continuing, press [3] again to intercom for another 30 seconds.
[5] key: Open 1
st
home appliance.
Open relay
[6] key: Close 1
st
home appliance.
Close relay
[7] key: Open 2nd home appliance.
[8] key: Close 2nd home appliance.
[9] key: Open mini siren or wireless siren. If need to close siren, press any one of 1/2/3/4 keys.
SMS command: 1234 [1-9] #
After receiving the alarm by phone, if the user just listens to the voice alarm and hangs up without any remote
control, the main unit will continue to dial the next number until somebody answers it. If no body answers, after the
main unit dials all the numbers for three times in turn, it will hang up automatically.
Remote Control
Dial the number associated to the alarm main unit by phone (mobile phone), and after one ringing cycle, you
can hear a voice prompt “Please enter the password”; enter the password by phone keys (factory default of remote
control password: 1234). If the password is correc
t, you will hear a prompt “Press
①
for arm ,
②
for disarm,
③
for
monitor,
④
for Intercom
”.
The specific operations are shown as below:
[1] Key: arm
, if finished successfully, you will hear a voice prompt “guard has been arranged in the system”.
[2] Key: disarm
, if finished successfully, you will hear a voice prompt “guard has been disabled in this system”.
[3] Key: monitoring for 30 seconds, to continue monitoring, press [3] again to monitor for another 30 seconds.
[4] Key: onsite intercom for 30 seconds, to continue intercom, press [4] again to monitor for another 30
seconds.
[5] key: Open 1
st
home appliance.
Open relay
[6] key: Close 1
st
home appliance.
Close relay
11
