main unit emits a long “delete finished”, and the indicator of defence zone 1 goes out. Code pairing for defence
zone 1 is deleted successfully.
7 Remote Control Programming
All the programming of the main unit are completed by key operations on a phone or send SMS
commands, which shall dial GSM card number of main unit first.
In the status of disarm, after GSM network is checked to be normal, dial the SIM card number by mobile phone
(or fixed phone), the main unit will answer automatically and give a voice prompt “Please enter the password”; then
you can enter the correct programming password (factory default: 8888); after that, the main unit emits a long
“beep”, and the [Arm] indicator flickers, indicating that the main unit enters remote control programming.
Function Instructions
Function
Operation Instructions
Notes
Enter Programming
Enter [password]
Long “beep”
Exit Settings
Hang up directly
Short “Beep”
Operation Password
[30] + [new password] + [#]
(modified)
Factory default: 1234
Programming Password
[31] + [new password] + [#]
(modified)
Factory default: 8888
Set Phone
[51] + [phone number] + [#]
[51]~[56] 6 groups
Delete Phone Number
[51] + [#]
[51]~[56] 6 groups
Message Receiving Phone
Number
[57] + [phone number] + [#]
[57]~[59] 3 groups
Delete Message
[57] + [#]
[57]~[59] 3 groups
defence zone Programming
[60]+[01~08]+[1~4]+[1~8]+[0/1]+[#]
Factory default: 1/1/0
Stay in defence zone
[61] + [01~08] + [0/1] + [#]
Factory default: 0
Remote Control
[password] + [1/2/3]
Voice prompt
Appliance Open
[password] +5# or [password] +7#
Appliance Close
[password] +6# or [password] +8#
SMS Instructions
Function
Operation Instructions
Notes
Operation Password
[Program password] + [30] + [new
password] + [#]
Factory default: 1234
Programming Password
[Program password] + [31] + [new
password] + [#]
Factory default: 8888
Set Phone
[Program password] + [51] +
[phone number] + [#]
[51]~[56] 6 groups
Delete Phone Number
[Program password] + [51] + [#]
[51]~[56] 6 groups
