Danley DNA 10K4, User Manual

Page: 19 / 49

19
Amplifier output connections
2+
1-
1+
2-
S
Speaker -
The Speakon
TM
connector for amplifier channel 1 carries the output for amplifier channels 1 and 2.
Similarly, the Speakon
TM
connector for amplifier channel 3 carries the output for amplifier channels 3
and 4. This can be useful for making a connection to two loudspeakers with one 4-­‐core cable (i.e. Bi-­‐
Amp):
Amplifier output connections – Bi Amp
2+
1-
1+
2-
Sp
Speaker1 -
Sp
Speaker2 -
In addition, the channel 1 or channel 3 connector can also be used if the pair of amplifier channels is
being operated in bridged mode.
Amplifier output connections – Bridge
2+
1-
1+
2-
S
Speaker -
More than one speaker can be connected to each channel provided the total impedance per channel
is not less than
2 ohms . In bridged mode the minimum total impedance should not be less than 4
ohms .
100V line operation
Each output of the device can be configured to drive either a low impedance load (LOW-­‐Z), or a
Constant Voltage (CV) such as 70V LINE or 100V LINE using the CV parameter in the Output menu.