background image

 I

 

 02 9604 1226    E 

 

I

 

 

[email protected]    W

 

 |

 

 danielaappliances.com.au

PA G E   2 3

TERMS AND CONDITIONS

TERMS OF WARRANTY

Daniela appliances warrants to the original purchaser of appliance providing the product is installed specifically 

for their intended use, under proper care, domestic/residential use and maintenance of the products supplied by 

Daniela appliances, will be free from defects in workmanship and materials subject to the terms and conditions 

to follow.
Daniela Appliances warranty only applies to the original owner and is not transferable. Our warranty covers 

rectification free of charge for any faults arising from defective materials or components and faulty workmanship. 

The product will be repaired or replaced at the discretion of Daniela Appliances.

NOTE:  All  costs  of  installation,  stone  benchtop  replacement,  cabinetry  replacement  or  repair,  sink/tapware 

removal, un-installation, cartage, freight, travelling expenses and insurance are to be paid by the customer.

RETURN POLICY

Kindly inspect your goods at time of delivery.
If you notice any damage to your goods please notify our delivery team at the time of delivery.  Recommend you 

thoroughly inspect your goods at this time. If you notice any damage to your goods please call with in 24 hours 

of receiving delivery, please notify Daniela Appliances Pty Ltd immediately. Evidence of damage will be required.
If for any reason you need to return an item please call Daniela Appliances Pty Ltd on (02 )9604-1226, within 

48 hours of receiving the goods or appliances.
If your goods remain boxed and in an unopened condition, they may be returned with in 30 days of the invoice 

date for a full refund.  A collection fee of $50 will be charged should you require Daniela Appliances Pty Ltd to 

collect the stock.
If your goods have been unboxed but otherwise are in as new condition (Have not been used or connected) a 

20% restocking fee (20% of the purchase price) will apply.
Daniela Appliances Pty Ltd DOES NOT DEAL WITH FACTORY SECONDS, DAMAGES OR OPENED GOODS, and 

charges restocking fees to cover the return costs. A collection fee of $50 or the delivery charge if greater than 

the $50 will apply.
Please note that if you request connection of your appliance, Daniela Appliances Pty Ltd will unbox the product at 

the time of delivery. We recommend you inspect your goods thoroughly at time of delivery, as to avoid extra charges.
Return  of  goods  are  to  be  covered  by  the  customer,  or  alternatively  can  be  returned  in  person  to  Daniela 

Appliances Pty Ltd, at no extra charge. Please note that a collection fee of $50 or greater will be charged should 

you wish Daniela Appliances Pty Ltd, to collect the stock on your behalf.
You as a customer have a duty of care for the product whilst in your possession. If products are damaged by you, 

and subsequently returned, a charge will be made to repair the product to its original condition. Please be aware 

that where repair is economically viable, no refund will be given.
All refunds will be issued when goods arrive back to Daniela Appliances warehouse and have been inspected 

accept returns of any goods that you have attempted to install or have used.
If there are any further queries, please don’t hesitate to contact Daniela Appliances Pty Ltd on (02) 9604 1226.

THANK YOU.

Summary of Contents for DAN1GTG

























Reviews: