background image

 

I

 

 02 9604 1226    E 

 I

 

 

[email protected]    W

  

 danielaappliances.com.au

PA G E   2

Daniela Appliances started in 1988. Formally known as Italnova, 

the company began operating by selling other major leading brands. 

Since then, Daniela Appliances has it’s own range, continuously 

evolving, striving on delivering leading-edge quality products at 

very competitive  prices.

From an Italian heritage our brand Daniela was then established in 

2005 from a father’s love to a daughter and naming it after Daniela, 

now the new proprietor.  Daniela has worked closely with her father for 

many years learning from his decades of industry experience. Daniela 

with her extensive knowledge and understanding of appliances, now 

continues her father’s legacy with a modern flare.

Our products are extensively tested and come with ISO certification 

certificates prior to importation. Daniela Appliances continuously 

designs and sources the best parts, to bring you an elegant feel that 

will last the test of time and for a third of the cost from a major brand.

Daniela Appliances is dedicated to offering our customers exceptional 

products with exceptional service. Our commitment is to provide our 

valuable customers the very best in technology with the very best in 

safety that combines both the values that brings us market success. 

Summary of Contents for DAN1GTG

























Reviews: