Daniela DAN1GTG User Manual Download

Page: 20 / 24

02 9604 1226 E

[email protected] W

danielaappliances.com.au

PA G E 2 0

TROUBLE

POSSIBLE CAUSE

SOLUTION

FOR THE USER

FOR THE TECHNICAL

SUPPORT SERVICE

After releasing the

knob, the flame

goes out.

Burner flame uneven.

Clean burner by

washing in warm soapy

water, dry and locate

burner correctly.

Check injector for

dirt/spillage. Clean

or replace burner if

necessary.

Pot supports not

correctly positioned.

Pot supports are

designed to go in one

location. Ensure pot

support is correctly

located over burner.

Gas smell.

Gas burner turned on

but not ignited.

wait 5 minutes. Ventilate

area. Attempt to relight

burner and ensure flame

stays lit.

Use approved

methods of checking

and locating gas

leaks. Repair as

required.

and can smell gas

appliance isolating valve

and contact gasfitter.

Replace it.

Burner flame uneven.

Clean burner by

washing in warm soapy

water, dry and locate

burner correctly.

Check injector for

dirt/spillage. Clean

or replace burner if

necessary.

Pot supports not

correctly positioned.

Pot supports are

designed to go in one

location. Ensure pot

support is correctly

located over burner.

Summary of Contents for DAN1GTG

























Search results

Summary of Contents for DAN1GTG

Reviews:

Related manuals for DAN1GTG

Brands by name

Popular brands

Daniela DAN1GTG, User Manual

Search results

Summary of Contents for DAN1GTG

Reviews:

Related manuals for DAN1GTG

Brands by name

Popular brands