2 4
37. TALKBACK AND DIM PAIRING
Tip:
,
When engaging the
talkback
switch,
dim
is automatically engaged; generally used to keep from blasting the control room
speakers into your
talkback
feed and looking like a tubhead in front of your clients. If you’re smart enough to know why
you should override this follow these instructions.
Benefit: To override
talkback
and
dim
pairing
,
first enter
setup
mode
. (See
setup
mode
section.) Then, press and hold the
talkback
button until it turns from bright to dim.
talkback
and
dim
are now unlinked. To restore the link, enter
setup
mode
and hold
the
talkback
button until it goes from dim to bright.
38. DIM LEVEL SETTING
Operation: To customize the
dim
level, enter
setup
mode
by pressing and holding the
usb
and
aes
/
spdif
setup buttons simultaneously
in the
ctrl
room
section. Press and hold the knob. The small
amber
LED beneath the knob will begin blinking slowly.
Now select your
dim
setting by turning the knob. The farther you turn up the
green
LEDs, the greater the amount of
dim
that will be applied. In other words, more
green
, less level- it acts as a cut. This is relative to the monitoring level, it
is not fixed. For example, if your listening volume is at 12:00 and your dim level is set to 9:00, upon engaging
dim
, the
volume will drop to 9:00. If you move your listening level to 3:00 and engage dim, the volume will drop to 12:00. (
dim
is
relative to the regular monitoring level). To commit, press the
volume
knob again. If you would like to exit press either
the
usb
or
aes
/
spdif
setup button in the
ctrl
room
section. It is now inactive on both the unit and your device.
39. REFERENCE LEVEL SETTING
Operation: This function defaults to off. To turn it on, enter
setup
mode
by pressing and holding the
usb
and
aes
/
spdif
setup buttons
simultaneously in the
ctrl
room
section. Next, hold down the
mono
7-8
button
until it lights bright
amber
. It is now
active on both the physical unit and your virtual device. On the
, push the volume knob twice, quickly. Now the
small
amber
LED beneath the knob will flash rapidly. Select your custom reference level. To commit, press the volume
knob in once. To exit, press either the
usb
or
aes
/
spdif
setup button in the
ctrl
room
section. To disable the
set
monitor
reference
level
functionality, simply go into
setup
mode
by pressing and holding the
usb
and
aes
/
spdif
setup buttons
simultaneously in the
ctrl
room
section. Next, hold down the
mono
7-8
button
until the button goes dim (like my X). To
commit, press the volume knob again and to exit
setup
mode
, press either the
usb
or
aes
/
spdif
setup button in the
ctrl
room
section. It is now inactive on both the unit and your device.
Tip:
,
If you want to set the reference level based on content coming from a specific input, select that input first, before entering
setup
mode
. Now you may listen as you adjust.
40. FACTORY RESET
Feature: Reset your
to its factory default settings.
Benefit: Your toddler managed to program your
into some pretzel like settings? Simply return it to the factory default.
Operation: Enter
setup
mode
. (See
setup
mode
section.) Then press and hold the
line
out
button until you see the lights of Las Vegas
and hear the relays clicking like church bells. (Identical operation from the free remote app as well.)
Remote Operation
41. COMPATIBILITY & INSTALLATION (as of printing)
iPhone: iOS v10.2 through current 13.X available via the Apple App Store
Mac:
macOS v10.8.6 through current 10.15 downloadable from www.dangerousmusic.com
Android: Available via Google Play - min v5.0 through current 10.0
Windows: 7, 8, 10 downloadable from www.dangerousmusic.com
