VLT Installation
Rev.02
45
North America
Motion Controls
Confidential / Property of Danfoss Drives A/S
Review
8) When wiring the control signals to a VLT, which
of the following, is a correct statement for
proper operation?
A. The control wiring can be wired in the same
conduit as incoming power.
B. The control wiring can be wired in the same
conduit as the motor output.
C. The control wire can be wired in the same
conduit as the dynamic brake resistor.
D. Statements A, B, and C are all correct.
E. Statements A, B and C are all wrong.