VLT Installation
Rev.02
31
North America
Motion Controls
Confidential / Property of Danfoss Drives A/S
a. General Wiring
b. Power Input
c. Motor Output
d. External 24Vdc
e. Brake &
Loadsharing
f. Control
5) Wiring
5) Wiring the Drive
This next section covers some of the wiring of the drive. The first area to be covered
is general wiring practices. The next part covers the power or line wiring from
incoming power to the drive. The motor wiring covers the connections between the
drive and the motor. After this external 24Vdc wiring is covered followed by
Dynamic Brake wiring and load sharing. Some general concerns are mentioned for
the control wiring. Specific Control wiring for Digital Inputs/Outputs and Analog
Input/Outputs and Relays are covered when the drives and their application are
covered in a following training module.