declaration of conformity that confirms CE labelling in
accordance with the low-voltage directive.
The CE label also applies to the EMC directive, provided
that the instructions for EMC-correct installation and
filtering are followed. On this basis, a declaration of
conformity in accordance with the EMC directive is issued.
The Design Guide offers detailed instructions for instal-
lation to ensure EMC-correct installation.
1.4.4 Compliance with EMC Directive
2004/108/EC
The frequency converter is mostly used by professionals of
the trade as a complex component forming part of a larger
appliance, system, or installation.
NOTE
The responsibility for the final EMC properties of the
appliance, system or installation rests with the installer.
As an aid to the installer, Danfoss has prepared EMC instal-
lation guidelines for the Power Drive system. The standards
and test levels stated for Power Drive systems are
complied with, provided that the EMC-correct instructions
for installation are followed, see
1.4.5 Conformity
Table 1.2 FCD 302 Approvals
1.5 Disposal
Equipment containing electrical
components may not be disposed of
together with domestic waste.
It must be separately collected with
electrical and electronic waste according
to local and currently valid legislation.
Table 1.3 Disposal Instruction
Introduction
VLT
®
Decentral Drive FCD 302
10
MG04H102 - VLT
®
is a registered Danfoss trademark
1
1